Showing all 24 results
-
45mm Rafter Gasket
Compatible with polycarbonate, glass, and acrylic sheeting – high quality flexible EPDM with non stretch cords of a special design – no creaking roofs.
-
55mm Rafter Gasket
Compatible with polycarbonate, glass, and acrylic sheeting.
-
Anchorglaze Condensation Control
Anchorglaze 25mm Condensation Control
-
Cap Endcap
An exitex cap end cap is used to finish off the top part of a ridge a where a more sleek modern appearance is desired.
-
Capex 40/60 Bridgings
Bridgings are used for the top end of a capex glazing bar where a seal up under a lean to flashing profile is required.
-
Capex 40/60 Endcap
The standard end caps are used to finish off and give a neat finish to the end of the galzing bar only.
-
Capex 40/60 Extended Endcap
Capex End Caps give you a neat finish for Capex when rafter gaskets are visible due to them extending into the guttering.
-
Capex 40/60 H/V Bridging
Simplifies the installation of Capex when used with a Jack rafter requiring it to be mitred to a King rafter.
-
Capex 40/60 Jackcap
Exitex Capex 40/60 Jackcap for use at top end of victorian conservatories, available in both Brown and White.
-
Capex 40mm
Use for capping single, double or triple glazed glass, acrylic and polycarbonate panels
Adjoining panels. -
Capex 50mm
Capex 50mm – use for capping single, double or triple glazed glass, acrylic and polycarbonate panels
-
Capex 60mm
Ideal for capping single, double or triple glazed glass, acrylic and polycarbonate panels.
-
Capex 70mm
Ideal for capping single, double or triple glazed glass, acrylic and polycarbonate panels.
-
Capex Gable End Profile 40/60mm
An advance on the standard Capex system offering the very best weather-proofing features.
-
Capex Wall Finishing Profile 40/60mm
An advance on the standard Capex system offering the very best weather-proofing features available.
-
Cresfinex Ridge
The Cresfinex Mk2 Ridge is a superior ridge system, manufactured from high tensile aluminium.
-
Gable Endcap
The exitex gable end cap is used at the end of a ridge where it meets a gable peak.
-
HGB Horizontal Glazing Bar
A Horizontal Glazing bar allows the connection of long lengths of Polycarbonate without the use of purlin support.
-
Hip & Valley Gasket
£3.68 – £107.28 Order Now -
Polymer Finial
Polymer Finial – 350mm tall and fits onto edge of ridge capping.
-
Radius Endcap
Aluminium 100mm Radius Endcaps providing a finish for Crestfinex M2 Ridge Bar.
-
Regency Crest
A Regency Crest sits on the M2 Ridge bringing a decorative finish to the roofing structure.
-
Snap Cover
Cover fits into all cresting profiles, and are used when crests are not required.
-
Wall Endcap
Aluminium radius end caps providing a radius end finish for Cresfinex M2 ridge bar.