Showing 1–24 of 26 results
-
0 – 30° x 110mm Adjustable Bend Single Socket
£16.32 – £16.79 Order NowAdjustable from 0-30°. Push-fit joint through an innovatively designed seal and snap-cap system.
-
45° Junction Double Socket
£8.18 Order NowPush-fit joint through an innovatively designed seal and snap-cap system.
-
87.5° Junction Double Socket
£8.18 Order Now87.5 deg junction push-fit joint through an innovatively designed seal and snap-cap system.
-
87° Swept Bends
£6.30 – £6.72 Order NowSwept bend with single socket. Push-fit joint through an innovatively designed seal and snap-cap system.
-
87° x 110mm Long Radius Bend Plain End
£24.55 Order Now87.5 deg junction with double socket. Not suitable for solvent welding.
-
Bottle Gulley
£16.59 Order NowPush-fit joint through an innovatively designed seal and snap-cap system.
-
Bottle Gulley Rear Inlet
£19.03 Order NowPush-fit joint through an innovatively designed seal and snap-cap system.
-
Clay Adaptor
£12.75 Order NowRubber 110mm underground pipe to clay pipe adaptor.
-
Double Socket Bends
£5.62 Order Now110mm bends with double socket. (slip repair for existing pipes and normal coupler for new connections).
-
Grid Adaptor
£7.54 Order NowRound to Square grid adaptor for bottle gullys to make it easier for block work.
-
Gulley Raising Piece
£9.94 Order NowGully raising piece with multiple cut lines to increase the height of your bottle gulley.
-
Invert Reducer
£7.92 Order Now160mm-110mm Invert Reducer provides efficient means of waste water drainage.
-
Junction Triple Socket
£9.33 Order NowJunction Triple Socket, available in 45 deg and 87.5deg.
-
Low Back P-Trap
£16.59 Order Now110mm single socket spigot low back p-trap.
-
Manhole Base
Order NowManhole Base available in both 320mm and 450mm, suitable for Drainage and Sewerage.
-
Manhole Cover – Round
Order NowManhole round cover available in 450mm or 320mm.
-
Raising Piece
£10.21 – £16.83 Order NowRaising Pieces come in 2 sizes, 320mm and 450mm.
-
Rectangular Hopper
£17.12 Order NowRectangular hopper 110mm allows rainwater and waste pipes to be connected to drainage systems.
-
Rest Bend
£12.18 – £13.56 Order NowRest bend 87.5deg used at the base of soil systems allowing stable connection between soil system and underground drainage system.
-
Riser Seals
£2.70 Order Now450mm Riser seals used to form a perfect seal between the inspection chamber and the riser.
-
Rodding Eye
£14.29 Order NowRodding eye for inspection use on drainage and rainwater systems. uPVC Construction, Push-Fit Connection.
-
Rubber Coupler
£8.81 Order NowRubber coupler used to connect soil pipes together. Provides a secure, tight seal.
-
Single Socket Bends
£4.77 Order NowSingle socket bends for 110mm pipe ranging from 15 deg to 87.5 deg.
-
Socket Plug
£2.23 Order NowDesigned to plug any unused sockets. Strong uPVC.
