You've Selected...
Solid Polycarbonate UV
Finishing & Fabrication Available
-
Up to 3m x 2m capacity, and a variety of different cutters achieving a wide range of cutting abilities in plastic and composite ali material.
-
Precision drilling can be done in any panel and any position with accurate and consistent holes. no restriction! specify what size you need.
-
We utilise a 600 ton press which has the capability or cold forming up to 10mm Polycarbonate. excellent for guards, screens, folded drip edges on glazing and canopies or structural bends on vertical glazing.
-
We specialise in edge routing, and are able to create any type of shaped edge. Most common is radius routing and chamfering, this produces a safe edge, perfect for wall mirrors, screens and exposed edges.
-
With 6000mm x 2100mm cutting capability. Quick and efficient with accuracy down to 0.1mm ensures consistent and accurate material cutting.
Applications
Clear:
Security glazing, north lights, protective visors/guards, balustrades, fabrication.
Patterned & tints:
Security privacy glazing, balustrades and balconies, north lights, curtain walls.
Properties
- Excellent fire resistance
- UV protected on both faces
- Extremely high impact resistance
- High light transmission
Technical Data
Fire Rating:
BS476 Part 7: Class 1Y
Light Transmission:
Clear 88%, Bronze 50%, Opals 55%, 37% 25% (3mm)
Co-efficient of linear Expansion:
DIN 53752 10-6/°C 60-70
BS5544:
Anti Bandit Glazing
BS6206:
Safety glazing for use in buildings
Technical Specifications
Property | Test Method | Conditions | Units | Values |
---|---|---|---|---|
Physical | ||||
Relative Density | ASTM D-792 | g/cm3 | 1.2 | |
Water Absorption | ASTM D-792 | 24hr @ 23°C | % | 0.15 |
Mechanical | ||||
Tensile Strength at yield | ASTM D-638 | 10mm/min | MPa | 65 |
Tensile Strength at break | ASTM D-638 | 10mm/min | MPa | 60 |
Elongation at yield | ASTM D-638 | 10mm/min | % | 6 |
Elongation at break | ASTM D-638 | 10mm/min | % | >90 |
Tensile Modulus of Elasticity | ASTM D-638 | 1mm/min | MPa | 2,300 |
Flexural Modulus | ASTM D-790 | 1.3mm/min | MPa | 2,600 |
Flexural Strength at yield | ASTM D-790 | 1.3mm/min | MPa | 65 |
Izod Impact Strength | ASTM D-256 | notched | J/m | 800 |
Charpy Impact Strength | ASTM D-256 | notched | J/m | 800 |
Impact Falling Weight | ISO 6603 | 3mm sheet | J | 158 |
Rockwell Hardness | ASTM D-785 | R Scale | 125 | |
Thermal | ||||
Service Temperature | °C | -50 to +100 | ||
Heat Distortion Temperature | ASTM D-648 | Load: 1.82MP | °C | 130 |
Vicat Softening Temperature | ASTM D-1525 | Load: 1Kg | °C | 150 |
Coefficient of Thermal Expansion | ASTM D-696 | mm/m°C | 0.065 | |
Thermal Conductivity | C-177 | W/m°K | 0.21 | |
Specific Heat Capacity | C-351 | kJ/kg°K | 1.26 | |
Optical | ||||
Service Temperature | ASTM D-1003 | % | 89 | |
Refractive Index | ASTM D-542 | 1.586 | ||
Yellowness Index | ASTM D-1925 | <1 | ||
Haze | ASTM D-1003 | % | <0.5 | |
Electrical | ||||
Service Temperature | ASTM D-149 | 500V/s | kV/mm | >30 |
Refractive Index | ASTM D-257 | Keithley | Ω | 5.1×10 |
Flammability | |
---|---|
Standard | Classifcation |
EN13501 | B, s1, d0 |
BS 476 Part 7 | Class 1 |
UL Classified | V2 (File e221255) |
NSP 92501,4 | M2 |
DIN 4102 | B1, B2 |
ASTM D-635 | CC1 |
Other physical properties and values available on request.