Showing 25–48 of 57 results
-
Economy Self Support Bar
When used with our ring beam and wall plate it makes an ideal choice for erecting or replacing a small lean-to conservatory roof, canopy or carport.
-
End Bar Adaptor
When intalling a lean too roof or a self support roof, the glazing bar used at each end of the roof is exactly the same as all intermediate bars, with the difference at each end of requiring an end bar adaptor.
-
End Bar Flashing Profile
When installing a self support roof adjacent to a wall, there needs to be flashing down over the edge glazing bar.
-
End Plate And Bridgings
The capex rafter top system requires end caps at the bottom of the glazing bar.
-
Filter Tape
Filter tape is essentially a breathable tape which fits over the bottom of muliwall.
-
Gable Endcap
The exitex gable end cap is used at the end of a ridge where it meets a gable peak.
-
Glass Retaining Plate
Strong aluminium retaining plate with pre-drilled screw holes and fixings.
-
Heavy Duty 3″ Corrugated PVC
3 inch corrugated sheet is a low cost or a good temporary solutions for a garden lean too, covered area or temporary canopy.
-
Heavy Duty Big 6 Corrugated PVC
Big 6 corrugated sheet or 6 inch corrugated sheet is a larger, stronger version of our 3 inch corrugated sheet.
-
Heavy Duty Self Support Bar
Our Heavy Duty Self Support Bar is for a Self Support System, and is used to join and support two polycarbonate sheets.
-
HGB Horizontal Glazing Bar
A Horizontal Glazing bar allows the connection of long lengths of Polycarbonate without the use of purlin support.
-
Hip & Valley Gasket
Order Now -
Jack Rafter Connector
Order Now -
Lean To Flashing Profile
Lean to flashing profile for roof pitches 5 degrees – 45 degrees.
-
Packers Mixed
Our window and glazing packers can help you install DGU (Double Glazed Units) and also ensure that the window you’re installing is level and secured square in any aperture.
-
Polymer Finial
Polymer Finial – 350mm tall and fits onto edge of ridge capping.
-
Radius Endcap
Aluminium 100mm Radius Endcaps providing a finish for Crestfinex M2 Ridge Bar.
-
Rafter Top Bar
An Economy Snap-Down Roof Glazing Bar with a heavy duty aluminium base section and tough UV stable upper section.
-
Rafter Top Bar Side Closure
The Rafter Top Bar Side Closure is to be used in conjunction with the Rafter Supported Glazing Bar.
-
Regency Crest
A Regency Crest sits on the M2 Ridge bringing a decorative finish to the roofing structure.
-
Ring Beam
Our ring beam for self supported systems work together with wall plates and self supported rafter bars.
-
Ring Beam Gutter Brackets
Ring Beam Gutter Brackets for use with our self-support ring beams.
-
Roof Vent Made To Size
Our Marvent roof vent has been designed for simple and effective installation.
-
Sheet End Closure
These are available in either white or brown for 10-35mm thicknesses.