You've Selected...
Foam PVC
Finishing & Fabrication Available
-
Precision drilling can be done in any panel and any position with accurate and consistent holes. no restriction! specify what size you need.
-
We use small and large strip heaters to form our bends. Mainly used for pre-bent panels for the hygiene cladding industry and bending acrylic and PETG for guards and /or point of display.
-
We specialise in edge routing, and are able to create any type of shaped edge. Most common is radius routing and chamfering, this produces a safe edge, perfect for wall mirrors, screens and exposed edges.
-
With 6000mm x 2100mm cutting capability. Quick and efficient with accuracy down to 0.1mm ensures consistent and accurate material cutting.
Applications
Signs, POS, displays, exhibitions.
Properties
- Quality surface
- Lightweight
- Easy to fabricate
- The surface of foam PVC readily accepts screen and digital print
- Perfect for applying vinyl cut graphics
- PE film protection
- Wide range of colours
Technical Data
Fire Rating:
BS476 Part 7: Class 1
Co-efficient of Linear Expansion:
DIN 53752 10-6/°C 60-70
Colour:
Red, Yellow, Blue & Green
Technical Specifications
Property | Test Method | Units-SI | Value |
---|---|---|---|
Physical | |||
Relative Density* | In-house | g/cm3 | 0.65-0.70 |
Water Absorption | ASTM D-570 | % | 0.5-0.8 |
Mechanical | |||
Tensile Strength at yield | ASTM D-638 | MPa | 16 |
Elongation at break | ASTM D-638 | % | 30 |
Flexural Strength at yield | ASTM D-790 | MPa | 28 |
Flexural Modulus* | ASTM D-790 | MPa | 900 |
Charpy Impact Strength | ASTM D-256 | J/m | 29 |
Shore D Hardness | value | N/A | |
Thermal | |||
Service Temperature* | In-house | °C | -50 to + 100 |
Heat Distortion Temperature* | In-house | °C | 63 |
Vicat Softening Temperature | ASTM D-648 | °C | 75 |
Coefficient of Thermal Expansion* | ASTM D-1525 | cm/cm°C | 6.70 |
Electrical | |||
Dielectric Strength | ASTM D-257 | Ω | 5×10’ |
Surface Resistivity | ASTM D-257 | Ω-cm | 2×10’ |
Notes: Foamed PVC has a self-extinguishing property. If ignited in air, it will die by itself. Subsequently, Foamed PVC complies with the most demanding fire resistance standards as indicated by these representative results.
The above tables cannot be directly compared due to the different test methods utilised, unless where indicated *. Relative density is stated for 3mm standard products.
Flammability | |
---|---|
Standard | Classifcation |
EN13501 | B, s1, d0 |
BS 476 Part 7 | Class 1 |
UL 94 | V-0 |
NSP 92501,5 | M-1, M-2 |
DIN 4102 | B-2 |